DIL/NetPC DNP/1110: 64-pin DIL Connector Pinout

The mechanical interface between the DIL/NetPC DNP/1110 and existing devices and equipment is a JEDEC 64-pin DIL connector with 2.54mm centers. This allows the direct integration to a standard 64-pin DIL socket. The 64 pins in total are used for 3.3 volt power supply (2 pins), Reset in and out (2 pins), two serial interfaces (10 pins), 10BASE-T and 100-BASE-TX Ethernet interface (4 pins), general purpose parallel I/O (20 pins) and the I/O extension bus (26 pins).

64-pin DIL Connector Pinout
Pin	Name	Group	Function
1	PA0	PIO	Parallel I/O, Port A, Bit 0
2	PA1	PIO	Parallel I/O, Port A, Bit 1
3	PA2	PIO	Parallel I/O, Port A, Bit 2
4	PA3	PIO	Parallel I/O, Port A, Bit 3
5	PA4	PIO	Parallel I/O, Port A, Bit 4
6	PA5	PIO	Parallel I/O, Port A, Bit 5
7	PA6	PIO	Parallel I/O, Port A, Bit 6
8	PA7	PIO	Parallel I/O, Port A, Bit 7
9	PB0	PIO	Parallel I/O, Port B, Bit 0
10	PB1	PIO	Parallel I/O, Port B, Bit 1
11	PB2	PIO	Parallel I/O, Port B, Bit 2
12	PB3	PIO	Parallel I/O, Port B, Bit 3
13	PB4	PIO	Parallel I/O, Port B, Bit 4
14	PB5	PIO	Parallel I/O, Port B, Bit 5
15	PB6	PIO	Parallel I/O, Port B, Bit 6
16	PB7	PIO	Parallel I/O, Port B, Bit 7
17	PC0	PIO	Parallel I/O, Port C, Bit 0 (Alternate Function: TXD4 Serial Channel 4 / CODEC)
18	PC1	PIO	Parallel I/O, Port C, Bit 1 (Alternate Function: RXD4 Serial Channel 4 / CODEC)
19	PC2	PIO	Parallel I/O, Port C, Bit 2 (Alternate Function: SCLK4 Serial Channel 4 / CODEC)
20	PC3	PIO	Parallel I/O, Port C, Bit 3 (Alternate Function: SFRM Serial Channel 4 / CODEC)
21	RXD1	SIO	COM1 Serial Port, RXD Pin
22	TXD1	SIO	COM1 Serial Port, TXD Pin
23	CTS1	SIO	COM1 Serial Port, CTS Pin
24	RTS1	SIO	COM1 Serial Port, RTS Pin
25	DCD1	SIO	COM1 Serial Port, DCD Pin
26	DSR1	SIO	COM1 Serial Port, DSR Pin
27	DTR1	SIO	COM1 Serial Port, DTR Pin
28	RI1	SIO	COM1 Serial Port, RI Pin
29	RESIN	RESET	RESET Input
30	TX+	LAN	10BASE-T/100BASE-TX Ethernet Interface, TX+ Pin
31	TX-	LAN	10BASE-T/100BASE-TX Ethernet Interface, TX- Pin
32	GND	---	Ground
33	RX+	LAN	10BASE-T/100BASE-TX Ethernet Interface, RX+ Pin
34	RX-	LAN	10BASE-T/100BASE-TX Ethernet Interface, RX- Pin
35	RESOUT	RESET	RESET Output
36	VBAT	PSP (Product Specific Pins)	Real Time Clock Battery Input
37	CLKOUT	PSP (Product Specific Pins)	Clock Output (Default 3.6864 MHz)
38	TXD2	PSP (Product Specific Pins)	COM2 Serial Port, TXD Pin
39	RXD2	PSP (Product Specific Pins)	COM2 Serial Port, RXD Pin
40	INT5	PSP (Product Specific Pins)	Interrupt Input 5
41	INT4	PSP (Product Specific Pins)	Interrupt Input 4
42	INT3	PSP (Product Specific Pins)	Interrupt Input 3
43	INT2	PSP (Product Specific Pins)	Interrupt Input 2
44	INT1	PSP (Product Specific Pins)	Interrupt Input 1
45	CS4	PSP (Product Specific Pins)	Chip Select Output 4. Physical Addr. Range 0x33000000-0x33FFFFFF
46	CS3	PSP (Product Specific Pins)	Chip Select Output 3. Physical Addr. Range 0x32000000-0x32FFFFFF
47	CS2	PSP (Product Specific Pins)	Chip Select Output 2. Physical Addr. Range 0x31000000-0x31FFFFFF
48	CS1	PSP (Product Specific Pins)	Chip Select Output 1. Physical Addr. Range 0x30000000-0x30FFFFFF
49	RDY	PSP (Product Specific Pins)	External Ready Input
50	RD	PSP (Product Specific Pins)	Read Signal, Expansion Bus
51	WR	PSP (Product Specific Pins)	Write Signal, Expansion Bus
52	SA3	PSP (Product Specific Pins)	Expansion Bus, Address Bit 3
53	SA2	PSP (Product Specific Pins)	Expansion Bus, Address Bit 2
54	SA1	PSP (Product Specific Pins)	Expansion Bus, Address Bit 1
55	SA0	PSP (Product Specific Pins)	Expansion Bus, Address Bit 0
56	SD7	PSP (Product Specific Pins)	Expansion Bus, Data Bit 7
57	SD6	PSP (Product Specific Pins)	Expansion Bus, Data Bit 6
58	SD5	PSP (Product Specific Pins)	Expansion Bus, Data Bit 5
59	SD4	PSP (Product Specific Pins)	Expansion Bus, Data Bit 4
60	SD3	PSP (Product Specific Pins)	Expansion Bus, Data Bit 3
61	SD2	PSP (Product Specific Pins)	Expansion Bus, Data Bit 2
62	SD1	PSP (Product Specific Pins)	Expansion Bus, Data Bit 1
63	SD0	PSP (Product Specific Pins)	Expansion Bus, Data Bit 0
64	Vcc	---	3.3 Volt Power Input

Please Note: Some pins are called "Product Specific Pins (PSP)". Future versions of the DIL/NetPC will differ only with this pins from the DNP/1110. All other pins will have the same functions.

The PIO Port C pins PC0 to PC3 can be used with the SA-1100 Serial Channel 4 / CODEC. The table shows the alternate pin assignment for these function. The SA-1110 Serial Channel 4 contains two separate full-duplex synchronous serial interfaces with two different modes (MCP and SSP). In MCP (Multimedia Communication Port) mode this serial interface can be used to interface external CODEC chips (i.e. Philips UCB1x00). In SSP (Synchronous Serial Port) mode these pins supports the National Semiconductor Microwire and Texas Instruments synchronous serial protocols as well as a subset of the Motorola serial peripheral interface (SPI) protocol.