SSV Logo

DIL/NetPC DNP/1110


Contact us

Back to Top Page

DIL/NetPC DNP/1110: Starter Kit SK5

The DIL/NetPC DNP/1110 starter kit is everything you need to get startet with your high-speed StrongARM-based embedded networking application.The starter kit includes a DNP/1110 module with a pre-installed embedded Linux, the evaluation board DNP/EVA2 (special version - without the ST16C2550 dual uart and the uart support chips), power supply, serial interface (nullmodem) cable, one CD-ROM with software and documentation and a printed user manual for the first steps with the starter kit.


The starter kit CD-ROM comes with a full GNU cross tool chain for C/C++ software development. This binary files of the tool chain runs on a x86 Linux-based host (SuSE, Red Hat or other) and builds ELF binary files for the Intel StrongARM SA-1110 32-bit RISC microcontroller. For using the DIL/NetPC DNP/1110 starter kit youd need a development system. The minimal configuration for this system is a Windows-based PC with the HyperTerminal terminal emulation program and a free COM port (COM1 or COM2) for the serial link between the DIL/NetPC DNP/1110 and HyperTerminal. For using the Ethernet link, your PC needs an Ethernet adapter with 10BASE-T interface. This environment allows web server Java applet programming and Linux shell script programming. For using the GNU C/C++ tool chain, it is necessary to run Linux on the development system.

DIL/NetPC DNP/1110: Starter Kit Key Features

The DIL/NetPC DNP/1110 pre-installed embedded Linux consists of two main components: 1. the Linux kernel and 2. the root filesystem. The DNP/1110 FLASH offers also a FLASH Loader for downloading new Versions of the Linux kernel and the root file system. This in-system programming feature can be used over a simple serial link between the development system and the DNP/1110.

  • DIL/NetPC DNP/1110 with Intel 206 MHz SA-1110 and Firmware in FLASH, 3.3 VDC Vcc
  • Firmware and Embedded Linux pre-installed in FLASH
  • Evaluation Board DNP/EVA2-SV (Special Version)
  • Nullmodem Cable
  • 110 VAC or 230 VAC to 5 VDC International Power Supply
  • CD-ROM with User Manual and Hardware/Programmers Manuals
  • Embedded Linux with Source
  • GNU Cross Tool Chain for C/C++ Software Development
  • Linux Remote Login with Telnet
  • Web Server Setup Sample
  • FTP Server Setup Sample
  • Many Sourcecode Samples

DIL/NetPC DNP/1110: Starter Kit Ordering Information

Ordercode Product
DNP/SK5 Starterkit with DNP/1110, DNP/EVA2-SV1, CD-ROM and Null-Modemcable.

SSV EMBEDDED SYSTEMS. Board Level Products. File: dnp0016.htm, Last Update: 21.Jan.2012
Copyight (c) 1996 - 2012 SSV and KDW. All rights reserved.