DIL/NetPC DNP/9200: Starter Kit SK25

The DIL/NetPC DNP/9200 starter kit is everything you need to get started with your AT91RM9200 ARM9-based embedded Ethernet/USB networking application. The starter kit includes a DNP/9200 module with a pre-installed embedded Linux, the evaluation board DNP/EVA10, USB cable for power supply, Ethernet cross-over cable, one CD-ROM with software and documentation and a printed user manual for the first steps with the starter kit.

The starter kit CD-ROM comes with a full GNU cross tool chain for C/C++ software development. This binary files of the tool chain runs on a x86 Linux-based host (SuSE, Red Hat or other) and builds ELF binary files for the AT91RM9200 ARM9 32-bit RISC microcontroller. For using the DIL/NetPC DNP/9200 starter kit you need a development system. The minimal configuration for this system is a Windows-based PC with 10/100 Mbps Ethernet LAN interface and one free USB port. The Ethernet connection allows Telnet-, FTP-, TFTP- and HTTP-based sessions. The USB connection provides the DNP/SK25 with power. This environment allows web server Java applet programming and Linux shell script programming. For using the GNU C/C++ tool chain, it is necessary to run Linux on the development system.

DIL/NetPC DNP/9200: Starter Kit Key Features

The DIL/NetPC DNP/9200 pre-installed embedded Linux consists of two main components: 1. the Linux kernel and 2. the root file system. The kernel offers FLASH File System (FFS) support. This allows you to download files via FTP or TFTP direct to the DNP/9200 FLASH memory.

DIL/NetPC DNP/9200 with 180 MHz AT91RM9200 and 16 Mbytes FLASH / 32 Mbytes SDRAM, 3.3 VDC Vcc

U-Boot Boot Loader and Embedded Linux pre-installed in FLASH

Evaluation Board DNP/EVA10

USB Cable

Ethernet cross-over cable

CD-ROM with User Manual and Hardware/Programmers Manuals

Embedded Linux with Source

GNU Cross Tool Chain for C/C++ Software Development

Linux Remote Login with Telnet

Web Server Setup Sample

FTP Server Setup Sample

Many Sourcecode Samples

DIL/NetPC DNP/9200: Starter Kit Ordering Information

Ordercode	Product
DNP/SK25	Starterkit with DNP/9200, DNP/EVA10, CD-ROM, USB and LAN cross-over cable.