DIL/NetPC ADNP/9200: User Documentation

DNPSK27-FS.pdf: DIL/NetPC ADNP/9200 User Information. Title: ADNP/9200 Linux Starter Kit DNP/SK27: First Steps. This document describes the steps for the first use of the ADNP/9200 DNP/SK27 starter kit with the DNP/EVA11 evaluation board. The document offers also some information for the host and development system setup.

ADNP9200-HWR.pdf: DIL/NetPC ADNP/9200 User Information. Title: DIL/NetPC ADNP/9200 Hardware Reference. This document describes the DIL/NetPC ADNP/9200 features, connectors, jumpers and pinouts. The document also offers a ADNP/9200 block diagram, a component description and part location diagrams.

DNPEVA11-HWR.pdf: DIL/NetPC DNP/EVA11 Evaluation Board User Information. Title: DIL/NetPC DNP/EVA11 Hardware Reference. This document describes the DNP/EVA11 features, connectors, jumpers and pinouts. The document also offers a DNP/EVA11 block diagram and a component description. The DNP/EVA11 is a part of the DNP/SK27 starter kit.

E2G-ESL1-HWR.pdf: DIL/NetPC ADNP/9200 User Information. Title: E2G/ESL1 Hardware Reference. This document describes the E2G/ESL1 GSM/GPRS board features, connectors, jumpers and pinouts. The E2G/ESL1 is an add-on board for the ADNP/9200 ESL (Expansion Sandwich Layer) connector. The E2W/ESL1 comes as a GSM/GPRS evaluation part for the DNP/SK27-GSM.

E2U-ESL1-HWR.pdf: DIL/NetPC ADNP/9200 User Information. Title: E2U/ESL1 Hardware Reference. This document describes the E2U/ESL1 UMTS/HSPA board features, connectors, jumpers and pinouts. The E2U/ESL1 is an add-on board for the ADNP/9200 ESL (Expansion Sandwich Layer) connector. The E2U/ESL1 comes as a UMTS/HSPA evaluation part (option) for the DNP/SK27-GSM.

E2W-ESL1-HWR.pdf: DIL/NetPC ADNP/9200 User Information. Title: E2W/ESL1 Hardware Reference. This document describes the E2W/ESL1 2.4 GHz IEEE 802.11 Wi-Fi board features, connectors, jumpers and pinouts. The E2W/ESL1 is an add-on board for the ADNP/9200 ESL (Expansion Sandwich Layer) connector. The E2W/ESL1 comes as a Wi-Fi evaluation part for the DNP/SK27-WiFi.

E2Z-ESL1-HWR.pdf: DIL/NetPC ADNP/9200 User Information. Title: E2Z/ESL1 Hardware Reference. This document describes the E2Z/ESL1 2.4 GHz WSN (Wireless Sensor Network) board features, connectors, jumpers and pinouts. The E2Z/ESL1 is an add-on board for the ADNP/9200 ESL (Expansion Sandwich Layer) connector. The E2Z/ESL1 comes as a WSN evaluation part for the DNP/SK27.

E2Z-BASE-HWR.pdf: DIL/NetPC ADNP/9200 User Information. Title: E2Z/BASE Hardware Reference. This document describes the E2Z/BASE 2.4 GHz WSN (Wireless Sensor Network) board features, connectors, jumpers and pinouts. The E2Z/BASE is a battery-driven WSN sensor board with a 2.4 GHz transceiver and a RS232-based sensor data input. The E2Z/BASE comes as a WSN evaluation part for the DNP/SK27.

SPIADC1-HWR.pdf: DIL/NetPC ADNP/9200 User Documentation. Title: SPI/ADC1 Hardware Reference.. This document describes the Analogue-to-Digital Converter (ADC) module features. The document also offer the SPI/ADC1 block diagram. The SPI/ADC1 is a option for the ADNP/9200 starter kit DNP/SK27.

pincount.pdf: DIL/NetPC Family User Information. Title: The DIL/NetPC DIL-64 and QIL-128 Pin Counting. The DIL/NetPC family members comes in different pin outs and form factors. This short document describes the pin count mechanism for the DIL-64 (DIL = Dual-in-Line) and the QIL-128 (QIL = Quad-In-Line) form factor.

u-boot-cmd.pdf: DIL/NetPC (A)DNP/9200 User Information. Title: U-Boot Boot Loader Command Overview. The (A)DNP/9200 boot loader - called "U-Boot" - offers a RS232 serial line- based command line interface. This short document shows a table with the (A)DNP/9200 U-Boot commands.

ENG-KGE-2006.pdf: DIL/NetPC (A)DNP/9200 User Information. Title: Developing Linux-based Embedded Networking Gateways. Kerstin Gerhardts presentation at the electronica show in Munich, Germany, November 2006. The paper describes the background and use cases for ADNP/9200-based embedded networking gateways.

WSN-KGE-2006.pdf: DIL/NetPC (A)DNP/9200 User Information. Title: Infrastructure Components for Wireless Sensor Networks. Kerstin Gerhardts presentation at the electronica show in Munich, Germany, November 2006. The paper describes the basic idea behind wireless sensor networks and shows how to use the ADNP/9200 as a gateway component between the wireless sensors and wired Ethernet-based LANs.

a9200-egs-wp1.pdf: DIL/NetPC ADNP/9200 User Information. Title: Embedded Gateway Server for Maintenance. This white paper describes how to use IP-based embedded gateway servers to consolidate the remote maintenance of multi-vendor factory automation systems for increasing system security and cuts costs.

mHTA9200-01.pdf: DIL/NetPC ADNP/9200 microHOWTO. Title: How to use the 2nd Ethernet LAN Interface (LAN2). The DIL/NetPC ADNP/9200 offers two 10/100 Mbps Ethernet LAN interfaces with independent MAC units. This short document describes how to use the the 2nd Ethernet LAN (LAN2) interface.

mHTA9200-02.pdf: DIL/NetPC ADNP/9200 microHOWTO. Title: How to use the WSN (Wireless Sensor Network) evaluation hardware parts. The DIL/NetPC ADNP/9200 starter kit DNP/SK27 comes with some additional WSN evaluation hardware parts. This short document describes how to use these parts.

mHTA9200-03.pdf: DIL/NetPC ADNP/9200 microHOWTO. Title: How to understand the differences between the DNP/9200 and ADNP/9200. The ADNP/9200 hardware and software is based on the architecture and concepts of the DNP/9200. This short document describes the main differences.

mHTA9200-04.pdf: DIL/NetPC ADNP/9200 microHOWTO. Title: How to change the ADNP/9200 Factory-Set IP Address for LAN1 (ipaddree usage). This short document describes how to change the ADNP/9200 factory-set IP address with the help of a command-line tool, called "ipaddree".

mHTA9200-05.pdf: DIL/NetPC ADNP/9200 microHOWTO. Title: How to change the U-Boot IP Addresses for the LAN1 Ethernet Interface. This short document describes how to change the U-Boot boot loader TCP/IP parameters "ipaddr", "serverip" and "netmask".

mHTA9200-06.pdf: DIL/NetPC ADNP/9200 microHOWTO. Title: How to set the ADNP/9200 IP Address for LAN1 with DHCP. This short document describes how to use the ADNP/9200 DHCP client program. This client reads a IP address at ADNP/9200 Linux boot time from a DHCP server.

mHTA9200-07.pdf: DIL/NetPC ADNP/9200 microHOWTO. Title: How to connect the DIL/NetPC ADNP/9200 to the Internet. The DIL/NetPC ADNP/9200 is prepared for a connection to the Internet. This short document describes how to connect the ADNP/9200 over a cable modem and a SOHO router to the Internet.

mHTA9200-08.pdf: DIL/NetPC ADNP/9200 microHOWTO. Title: How to change the ADNP/9200 Factory-Set IP Address for LAN2. This short document describes how to change the ADNP/9200 factory-set IP address for the LAN2 Ethernet Interface.

mHTA9200-09.pdf: DIL/NetPC ADNP/9200 microHOWTO. Title: How to use the E2W/ESL1 Wi-Fi Adapter. The DIL/NetPC ADNP/9200 starter kit DNP/SK27-WiFi comes with the E2W/ELS1 as an additional WiFi evaluation hardware part. This short document describes how to use this part.

mHTA9200-10.pdf: DIL/NetPC ADNP/9200 microHOWTO. Title: How to prepare the DNP/EVA11 for Wi-Fi with the E2W/ESL1 Module. The E2W/ESL1 module is over the ADNP/9200 two-part ESL connector direct connected to the LAN2 Ethernet network interface. This means, the E2W/ESL1 Wi-Fi module works for the ADNP/9200 as an Ethernet-to-Wi-Fi bridge. This short document describes how to remove the TR2 magnetic for the LAN2 Ethernet LAN interface from a DNP/EVA11. This allows ADNP/9200 users to upgrade from DNP/SK27 to DNP/SK27-WiFi.

mHTA9200-11.pdf: DIL/NetPC ADNP/9200 microHOWTO. Title: How to prepare the DIL/NetPC ADNP/9200 for Wi-Fi. The DNP/SK27-WiFi starter kit comes with a preinstalled Wi-Fi software configuration for the E2W/ESL1. This software is also available for download. This allows ADNP/9200 users to upgrade from DNP/SK27 to DNP/SK27-WiFi.

mHTA9200-12.pdf: DIL/NetPC ADNP/9200 microHOWTO. Title: How to change the E2W/ESL1 Wi-Fi Transceiver Setup. The E2W/ESL1 Wi-Fi transceiver module contains an own setup configuration. The most important data elements of this setup configuration are the SSID name (Wi-Fi network name), network mode, and the security configuration. This short document describes how to change this setup.

mHTA9200-14.pdf: DIL/NetPC ADNP/9200 microHOWTO. Title: How to use AJAX technology over a Wi-Fi-based communication link. The elements of web-based user interfaces are static. The update of a value needs a complete page reload. The alternative is the use of AJAX (Asynchronous JavaScript and XML) technology. This short document describes a sample for Wi-Fi-based links (ADNP/9200 with E2W/ESL1).

mHTA9200-15.pdf: DIL/NetPC ADNP/9200 microHOWTO. Title: How to debug AJAX-based Web Pages. The DIL/NetPC ADNP/9200 starter kit DNP/SK27-WiFi comes with a preinstalled AJAX demo. This document describes how to expand the Firefox web browser with the Firebug extension and how to debug a AJAX-based web page.

mHTA9200-16.pdf: DIL/NetPC ADNP/9200 microHOWTO. Title: How to use the ADNP/9200 Autostart Feature. This short document describes how to write a Linux shell script file for the ADNP/9200 Linux Autostart feature. The Autostart feature allows you to start a program at boot time.

mHTA9200-17.pdf: DIL/NetPC ADNP/9200 microHOWTO. Title: How to install and run an OpenVPN client on your Windows-based PC. This short document describes how to install and setup OpenVPN as a client on a Windows-based PC and how to connect this client to an ADNP/9200 OpenVPN server.

mHTA9200-18.pdf: DIL/NetPC ADNP/9200 microHOWTO. Title: How to validating your HTML pages. If you are writing HTML code for the DIL/NetPC ADNP/9200 web server, please make sure that the HTML is well-formed. This short document shows how to use the W3C (World Wide Web Consortium) validator service to check your HTML.